Product Description :
- Generator control for
Stand-by and PrimePower applications
- Direct communication with EFI engines
- Total remote monitoring and control
- Rental functions
- Integrated programmable PLC
Main feature :
- Easy to install, configure and use
- Multiple communication options, including:
• Internet connexion 4G with GPS localizer
• Communication port RS232, RS485, Ethernet, CAN
• On board USB with programming without power
• Internet access using Ethernet, GPRS or 4G
• Support for Modbus and SNMP protocols
- Advanced internal PLC with programming and control software included in the PC software
- Control and monitoring via Web
- Sending Email and SMS in different languages
- Communication protocol SNMP Traps
- Power saver mode zero consumption
- Event log with 350 complete records
- Load shedding, dummy load capability
- Tier 4 final support
- Multiples programmable Timer
Engine control
- Starter prepare (pre-heating or pre-lubrication)
- GAS engine support
- Start and Stop sequence programmable
- Fuel solenoid selection
- Engine speed protection
- Local or Remote Start
- Detection engine running (D+, VCA, CANBUS, RPM)
Engine measures
- 4 configurable analog input
- Preset standard sensor (VDO, Datcon, etc...)
- Engine speed measurement through Pick-up or CanBus
Generator measures
- Voltage control configurable :
• 3Ph 4W – Ph-Ph voltage, Ph-N voltage
• 3Ph 3W – Ph-Ph voltage
• Split Ph – Ph-N voltage
• Mono Ph – Ph-N voltage
- Voltage (Diret or on P.T.)
- Current
- Frequency
- Active and reactive power
- Apparent power
- Genset KWh
Generator protecion
- Over and under voltage
- Over and under frequency
- Overload
- Short current protection
- Voltage unbalance
Display
- 132 x 64 pixel back illuminated
- Selectable communication in multiple language
- Communications of intuitive text
- Communications for diagnostic engines connected CanBus
- Historical events complete with all the most important informazions
Dimensions and Protections
- With 210 mm ; Height 150 mm ; Depth 47 mm
- Protection IP65 front panel
Various functions
- Select language : Italian, English, Spanish, French, Chinese and more
- THREE levels of configurable Password
- Serial Port RS232 – RS485 - Ethernet IP (optional)
- Communication Protocol MODBUS RTU / TCP-IP
- Communication Protocol SNMP Traps
- Software per PC remote control compatible with all operating system
- Connection of more controller on-line of remote management and control
- EJP Function (France)
- Generator start funcion from outside and exchange switching in mains presence
- Input for simulation or mains failure
- Input for simulation or generator failure
- Remote battery signalling state
- IDLE Starting and Stop
- Prestart Glow plug selction
- Support gasoline motors
- Fuel pump control
- Possibility of operation with external key switch
- 8 digital inputs fully programmable and configurable
- 8 digital outputs fully programmable and configurable
- Automatic periodic test: setting the date and time of departure. Repeat daily, weekly, monthly
- Clock function: the UP1-PLUS dhas clock calendar
- Pick-up detection and temperature, oil and fuel level integrated sensors
- Sending SMS alarm signaling or general status for multiple phone numbers (in conjunction with GPRS modem)
- Store all events of historic with date, time and various information
- Optional module for expansion of 8 inputs and 8 outputs