This website or its third party tools use cookies, which are necessary to its functioning and required to achieve the purposes illustrated in the cookie policy. If you want to know more or withdraw your consent to all or some of the cookies, please refer to the cookie policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise, you agree to the use of cookies

Electronic Card UP1-PLUS (Engine CanBus J1939)

Electronic Card UP1-PLUS
(Engine CanBus J1939)

Technical Characteristics

News New Firmware
- Diagnostics via J1939 in text format and support EFI engines
- Support MTU Smart Connect and Tier IV
- Dummy Load
- Control fuel consumption and theft
- Differential protection integrated (optional expansion)
- Selection alternative configuration, for example 50/60 Hz
- Control of two UP1-PLUS emergency, master and standby
- Ppossibility of manual operation for generators
- Measures of power Mains included KWh
- Integrated management protocol SNMP communication without converter

Compatibility CanBus J1939
- On the UP1-PLUS tha management of the motors can be happen in traditional way or through connection
CANBUS SAE J1939 for the motors wath :
Caterpillar, Cummins, Detroit Diesel, Deutz, General Motoor, Isuzu, Iveco, John Deere, MAN, MTU, Perkins, Scania, Sisu, VM Motors, Volvo Penta an others.

- The principal communications happen for :
Diagnostic motor
Indications speed motor
Indications measures motor
Planning works particular
Start and Stop (If foreseen by the motor)

Control motor
- Preparation starting (preheating or prelubrication)
- Sequence of starting and stop completely programmable
- Selection fuel electrovalve
- Protection motor speed
- Starting local or remote
- Detection engine running ( D+ or input programmable)

Motor Measures
- Three analogic inputs configurable compatible VDO
- Eight analogic inputs configurable (optional)
- Engine speed sensing through : magnetic pick-up or CanBus

Generator Measures
- Control and monitoring of the three phases
- Voltage (direct or T.V.)
- Current
- Frequency
- Active and reactive power
- Apparent power
- Contactor of Energy KWh

Generator protection
- Over and under voltage
- Over and under frequency
- Overload
- Short circuit protection
- Voltage unbalance

- The UP1-PLUS can be supplied on a special mechanical flange and electrical interface for connecting a full interchangeability with the logic UP1-LCD

- 128 x 64 pixel back illuminated grafic
- Selection of communication in multiple languages
- Text communications intuitive
- Communications for engine diagnostics connected CanBus
- Historical events complete with all the important informations

- Width 180 mm ; Height 120 mm ; Depth 55 mm


Various functions
- Select language : English, Italian, Spanish, French, German, Portuguese, Chinese, Russian, Jewish
- Password protection for changing parameters
- Serial port RS232 – RS485 - Ethernet for connection Internet(optional)
- Protocol of communication in MODBUS
- Protocol of communication in SNMP-MIB
- Software for remote PC compatible with operating system
- Connection more logics to remote management and control
- Management system by two UP1-PLUS, function MASTER / REMOTE
- Function EJP (France)
- Function generator starting from external and exchange commutation in presence of mains
- Input for simulation or failure mains
- Input for simulation or failure generator
- Distance signaling of battery status
- Starting and stopping at low turns
- Glow plugs preheating
- Fuel pump control
- Possibility of working with external key switch
- 7 digital inputs fully programmable and configurable
- 7 digital outputs fully programmable and configurable
- Automatic periodic test : setting the date and time of starting. Daily, weekly, monthly repetition
- Function clock : the UP1-PLUS has clock datestamp
- Survey Pick-up temperature sensors, oil and fuel level integrated
- Dispatch SMS of alarms signaling or general states on telephone number that can be planned (in combining with modem GSM)
- Memorization of all the events on historical with indications with dates and times and various information
- Optional form fo expansion of 8 inputs or 8 outputs

Scarica la brochure con i prodotti Tecnocontrolli (ITA)

Tecnocontrolli (4,12 Mb)

Tecnocontrolli brochure prodotti